Español
Cylindrical Round Bore Ball Bearing 700707402 Replacement Bearing And Seal Part For BEARING SEAL INFORMATION TWO SEALS
cylindrical round bore ball bearing 700707402
,baler bearing and seal part
,two seals bearing and seal part
Basic Properties
Trading Properties
In short: Cylindrical Round Bore Ball Bearing 700707402 is a bearing, bush or seal that supports a rotating shaft or keeps lubricant in and contamination out for BEARING SEAL INFORMATION TWO SEALS & BORE SHAPE ROUND large square balers. Aftermarket replacement, 1 1 piece minimum order, T/T payment, 7-15 days delivery.
Part 700707402 is a bearing, bush or seal that supports a rotating shaft or keeps lubricant in and contamination out. It is listed for BEARING SEAL INFORMATION and BORE SHAPE large square balers and is supplied as an aftermarket replacement matched to reference number 700707402.
The part sits in the rotating shaft support area of the baler. Rotating assemblies on a square baler such as the packer, stuffer and knotter shafts run in bearings and are protected by seals. These parts carry radial load and exclude dust, chaff and wash water, so their condition controls how long the shaft and housing last. Dealers usually hold it together with the related parts that wear in the same area, so a repair is not delayed waiting for a small component.
Key features- Housing and shaft fits matched to the original so the part is not loose or over-tight.
- Sealing lip and dust exclusion designed for chaff and wash-down conditions.
- Supplied clean and ready to install with standard tools.
- Fits BEARING SEAL INFORMATION TWO SEALS. See the compatibility table for the full list of machines.
- Packed with rust preventive protection and labelled with the reference number for easy receiving checks.
- Minimum order one 1 piece, payment by T/T, standard delivery 7-15 days.
| AGCO Part No. | 700707402 |
|---|---|
| Description (EN) | Cylindrical Round Bore Ball Bearing |
| Part Type | Bearings & Seals |
| Unit | 1 piece |
| Net Weight | 0.15 kg |
| Place of Origin | China |
| Minimum Order | 1 1 piece |
| Payment Terms | T/T |
| Delivery Time | 7-15 days |
| Supply Ability | 500 pieces per month |
| Packing | Carton with rust preventive wrap, palletised for export |
| Brand | Machine models |
|---|---|
| BEARING SEAL INFORMATION | TWO SEALS |
| BORE SHAPE | ROUND |
| BEARING OUTER RACE DESIGN | CYLINDRICAL |
| INTERIOR DIAMETER | 0.393 IN |
| OUTSIDE DIAMETER | 1.181 IN |
| INNER RACE WIDTH | 0.354 IN |
| OUTER RACE WIDTH | 0.354 IN |
- Clean the shaft seat and housing bore before pressing in a new bearing or seal.
- Press on the race that is being fitted, never through the rolling elements.
- Lubricate the seal lip and the shaft before assembly so the lip does not run dry on start-up.
- Check shaft end float and alignment after fitting; a misaligned housing shortens bearing life sharply.
- Re-grease to the schedule and check for weeping within the first hours of operation.
A: 700707402 is listed for BEARING SEAL INFORMATION: TWO SEALS; BORE SHAPE: ROUND; BEARING OUTER RACE DESIGN: CYLINDRICAL; INTERIOR DIAMETER: 0.393 IN; OUTSIDE DIAMETER: 1.181 IN; INNER RACE WIDTH: 0.354 IN; OUTER RACE WIDTH: 0.354 IN. Confirm your model and serial range with us if the machine has been repaired before with non standard parts.
A: No. It is an aftermarket replacement manufactured to fit machines that use reference 700707402. It is supplied as a cost effective alternative for maintenance and repair work.
A: It is a bearing, bush or seal that supports a rotating shaft or keeps lubricant in and contamination out. Rotating assemblies on a square baler such as the packer, stuffer and knotter shafts run in bearings and are protected by seals. These parts carry radial load and exclude dust, chaff and wash water, so their condition controls how long the shaft and housing last.
A: Send us your machine model, serial range and a photo of the existing part. We check the reference number and the visual details against the listing before you commit to an order.
A: Minimum order is one 1 piece, payment by T/T, delivery normally 7-15 days after payment confirmation, with supply capacity of around 500 pieces per month.
A: Bearings are supplied with standard preservative grease. Add the lubricant specified in your service manual for the application before running the machine.
Send us your part number, machine model and quantity, and we will confirm price, packing and lead time. Mixed orders combining this bearing and seal part with knotter parts, needles, knives and feeder dogs from the same machine family can be consolidated into one shipment.
