Español
Grease Fitting 70930680 Replacement Hydraulic Part For Challenger PTD12 Roller & Massey Ferguson MF2170XD Baler
grease fitting 70930680
,baler hydraulic part
,ptd12 roller hydraulic part
Basic Properties
Trading Properties
In short: Grease Fitting 70930680 is a hydraulic or fluid line component that carries pressure or routes fluid at a junction for Challenger PTD12 Roller & Massey Ferguson MF2170XD large square balers. Aftermarket replacement, 1 1 piece minimum order, T/T payment, 7-15 days delivery.
Part 70930680 is a hydraulic or fluid line component that carries pressure or routes fluid at a junction. It is listed for Challenger and Massey Ferguson large square balers and is supplied as an aftermarket replacement matched to reference number 70930680.
In service it belongs to the hydraulic and line routing group of components. Hydraulic and line components on a square baler route fluid and air under pressure. Joints and hoses see vibration, heat and pressure pulses, so sealing faces and thread condition decide whether the assembly stays dry through a season. Contractors running several machines of the same family often order a small quantity, since one reference covers the whole fleet.
Key features- Threads and seat machined for a clean seal without excess sealant.
- Body sized to keep line routing tight to the frame.
- Surface protected against corrosion in damp working conditions.
- Fits Challenger PTD12 Roller. See the compatibility table for the full list of machines.
- Packed with rust preventive protection and labelled with the reference number for easy receiving checks.
- Minimum order one 1 piece, payment by T/T, standard delivery 7-15 days.
| AGCO Part No. | 70930680 |
|---|---|
| Description (EN) | GREASE FITTING |
| Part Type | Hydraulic & Hose Fittings |
| Unit | 1 piece |
| Net Weight | Not specified by the factory data sheet |
| Place of Origin | China |
| Minimum Order | 1 1 piece |
| Payment Terms | T/T |
| Delivery Time | 7-15 days |
| Supply Ability | 500 pieces per month |
| Packing | Carton with rust preventive wrap, palletised for export |
| Brand | Machine models |
|---|---|
| Challenger | PTD12 Roller, PTD12 Spoke, 2270XD, LB34BXD, CHLB34, PTD12B, CHLB44B, CHLB34B |
| Massey Ferguson | MF2170XD, MF2270, MF2270XD, MF2290, MF4200S-13 Pick Up Header, MF1372, MF1375, MF2250, MF1363, MF2150, MF2170, MF1373, MF1376, MF13 |
- Check the port count, thread size and seat type against the old part before fitting.
- Clean both mating faces and inspect the threads; never force a fitting into a damaged port.
- Tighten to the torque in the service manual, then run a short cycle and check for weeping.
- Check line clamps and supports in the same area, since vibration is the usual cause of failure.
- Use the specified fluid and bleed the circuit if the repair opened it.
A: 70930680 is listed for Challenger: PTD12 Roller, PTD12 Spoke, 2270XD, LB34BXD, CHLB34, PTD12B, CHLB44B, CHLB34B; Massey Ferguson: MF2170XD, MF2270, MF2270XD, MF2290, MF4200S-13 Pick Up Header, MF1372, MF1375, MF2250. Confirm your model and serial range with us if the machine has been repaired before with non standard parts.
A: No. It is an aftermarket replacement manufactured to fit machines that use reference 70930680. It is supplied as a cost effective alternative for maintenance and repair work.
A: It is a hydraulic or fluid line component that carries pressure or routes fluid at a junction. Hydraulic and line components on a square baler route fluid and air under pressure. Joints and hoses see vibration, heat and pressure pulses, so sealing faces and thread condition decide whether the assembly stays dry through a season.
A: Send us your machine model, serial range and a photo of the existing part. We check the reference number and the visual details against the listing before you commit to an order.
A: Minimum order is one 1 piece, payment by T/T, delivery normally 7-15 days after payment confirmation, with supply capacity of around 500 pieces per month.
A: Seals are supplied as shown in the listing. If you need a specific seal material or a full seal kit, tell us the fluid and operating temperature.
Send us your part number, machine model and quantity, and we will confirm price, packing and lead time. Mixed orders combining this hydraulic part with knotter parts, needles, knives and feeder dogs from the same machine family can be consolidated into one shipment.
