Español
Hydraulic Hose 700729499 Replacement Hydraulic Part For NET LENGTH 68.9 IN Baler
hydraulic hose 700729499
,baler hydraulic part
,68.9 in hydraulic part
Basic Properties
Trading Properties
In short: Hydraulic Hose 700729499 is a hydraulic or fluid line component that carries pressure or routes fluid at a junction for NET LENGTH 68.9 IN large square balers. Aftermarket replacement, 1 1 piece minimum order, T/T payment, 7-15 days delivery.
700729499 is the reference used for a hydraulic or fluid line component that carries pressure or routes fluid at a junction on NET LENGTH square balers. We supply it as an aftermarket part, dimensionally matched to the original so it installs in the same location without modification.
In service it belongs to the hydraulic and line routing group of components. Hydraulic and line components on a square baler route fluid and air under pressure. Joints and hoses see vibration, heat and pressure pulses, so sealing faces and thread condition decide whether the assembly stays dry through a season. Dealers usually hold it together with the related parts that wear in the same area, so a repair is not delayed waiting for a small component.
Key features- Threads and seat machined for a clean seal without excess sealant.
- Body sized to keep line routing tight to the frame.
- Surface protected against corrosion in damp working conditions.
- Fits NET LENGTH 68.9 IN. See the compatibility table for the full list of machines.
- Packed with rust preventive protection and labelled with the reference number for easy receiving checks.
- Minimum order one 1 piece, payment by T/T, standard delivery 7-15 days.
| AGCO Part No. | 700729499 |
|---|---|
| Description (EN) | HYDRAULIC HOSE |
| Part Type | Hydraulic & Hose Fittings |
| Unit | 1 piece |
| Net Weight | Not specified by the factory data sheet |
| Place of Origin | China |
| Minimum Order | 1 1 piece |
| Payment Terms | T/T |
| Delivery Time | 7-15 days |
| Supply Ability | 500 pieces per month |
| Packing | Carton with rust preventive wrap, palletised for export |
| Brand | Machine models |
|---|---|
| NET LENGTH | 68.9 IN |
- Check the port count, thread size and seat type against the old part before fitting.
- Clean both mating faces and inspect the threads; never force a fitting into a damaged port.
- Tighten to the torque in the service manual, then run a short cycle and check for weeping.
- Check line clamps and supports in the same area, since vibration is the usual cause of failure.
- Use the specified fluid and bleed the circuit if the repair opened it.
A: 700729499 is listed for NET LENGTH: 68.9 IN. Confirm your model and serial range with us if the machine has been repaired before with non standard parts.
A: No. It is an aftermarket replacement manufactured to fit machines that use reference 700729499. It is supplied as a cost effective alternative for maintenance and repair work.
A: It is a hydraulic or fluid line component that carries pressure or routes fluid at a junction. Hydraulic and line components on a square baler route fluid and air under pressure. Joints and hoses see vibration, heat and pressure pulses, so sealing faces and thread condition decide whether the assembly stays dry through a season.
A: Send us your machine model, serial range and a photo of the existing part. We check the reference number and the visual details against the listing before you commit to an order.
A: Minimum order is one 1 piece, payment by T/T, delivery normally 7-15 days after payment confirmation, with supply capacity of around 500 pieces per month.
A: Seals are supplied as shown in the listing. If you need a specific seal material or a full seal kit, tell us the fluid and operating temperature.
Send us your part number, machine model and quantity, and we will confirm price, packing and lead time. Mixed orders combining this hydraulic part with knotter parts, needles, knives and feeder dogs from the same machine family can be consolidated into one shipment.
