Español
Blade ACW4830080 Replacement Baler Knife For Challenger 2270XD & Massey Ferguson MF2250
blade ACW4830080
,baler knife
,2270xd baler knife
Basic Properties
Trading Properties
In short: Blade ACW4830080 is a hardened cutting blade that shears the crop mat as the plunger compresses a flake for Challenger 2270XD & Massey Ferguson MF2250 large square balers. Aftermarket replacement, 1 1 piece minimum order, T/T payment, 7-15 days delivery.
Part ACW4830080 is a hardened cutting blade that shears the crop mat as the plunger compresses a flake. It is listed for Challenger and Massey Ferguson large square balers and is supplied as an aftermarket replacement matched to reference number ACW4830080.
It is fitted to the plunger and shear assembly. Baler knives cut the crop against a fixed edge on every plunger stroke. A clean shear produces a square, well defined bale face and keeps power demand steady; a dull or chipped edge tears the crop instead, leaving a ragged flake and loading the drive train. Dealers usually hold it together with the related parts that wear in the same area, so a repair is not delayed waiting for a small component.
Key features- Hardened cutting edge for clean shearing of hay and straw at full plunger load.
- Edge geometry matched to the original so shear clearance is correct after fitting.
- Flat ground back face ensures even seating on the mounting surface.
- Fits Challenger 2270XD. See the compatibility table for the full list of machines.
- Packed with rust preventive protection and labelled with the reference number for easy receiving checks.
- Minimum order one 1 piece, payment by T/T, standard delivery 7-15 days.
| AGCO Part No. | ACW4830080 |
|---|---|
| Description (EN) | BLADE |
| Part Type | Blades & Cutting Parts |
| Unit | 1 piece |
| Net Weight | Not specified by the factory data sheet |
| Place of Origin | China |
| Minimum Order | 1 1 piece |
| Payment Terms | T/T |
| Delivery Time | 7-15 days |
| Supply Ability | 500 pieces per month |
| Packing | Carton with rust preventive wrap, palletised for export |
| Brand | Machine models |
|---|---|
| Challenger | 2270XD |
| Massey Ferguson | MF2250, MF2270XD, MF2270 |
- Check shear clearance between the moving and fixed knife after fitting; it should match the service manual.
- Clean the mounting face so the blade sits flat; a trapped chip will crack the edge under load.
- Use new or correctly torqued fixings, and check them again after the first bales.
- Inspect the fixed knife for matching wear, since a worn counter edge dulls a new blade quickly.
- Keep a spare set on the machine during harvest, as crop type strongly affects edge life.
A: ACW4830080 is listed for Challenger: 2270XD; Massey Ferguson: MF2250, MF2270XD, MF2270. Confirm your model and serial range with us if the machine has been repaired before with non standard parts.
A: No. It is an aftermarket replacement manufactured to fit machines that use reference ACW4830080. It is supplied as a cost effective alternative for maintenance and repair work.
A: It is a hardened cutting blade that shears the crop mat as the plunger compresses a flake. Baler knives cut the crop against a fixed edge on every plunger stroke. A clean shear produces a square, well defined bale face and keeps power demand steady; a dull or chipped edge tears the crop instead, leaving a ragged flake and loading the drive train.
A: Send us your machine model, serial range and a photo of the existing part. We check the reference number and the visual details against the listing before you commit to an order.
A: Minimum order is one 1 piece, payment by T/T, delivery normally 7-15 days after payment confirmation, with supply capacity of around 500 pieces per month.
A: Dense dry straw loads the edge hardest. Tell us the crop and bale density you run and we will recommend the grade that gives the best edge life for that duty.
Send us your part number, machine model and quantity, and we will confirm price, packing and lead time. Mixed orders combining this baler knife with knotter parts, needles, knives and feeder dogs from the same machine family can be consolidated into one shipment.
