Español
Bushing 6131916 Replacement Bearing And Seal Part For Gleaner R65 & Massey Ferguson MF9190 Baler
bushing 6131916
,baler bearing and seal part
,r65 bearing and seal part
Basic Properties
Trading Properties
In short: Bushing 6131916 is a bearing, bush or seal that supports a rotating shaft or keeps lubricant in and contamination out for Gleaner R65 & Massey Ferguson MF9190 large square balers. Aftermarket replacement, 1 1 piece minimum order, T/T payment, 7-15 days delivery.
Reference number 6131916 corresponds to a bearing, bush or seal that supports a rotating shaft or keeps lubricant in and contamination out. This replacement is produced to fit the same position on Gleaner and Massey Ferguson large square balers, so it can be fitted with the standard tooling and fixings.
It is fitted to the rotating shaft support assembly. Rotating assemblies on a square baler such as the packer, stuffer and knotter shafts run in bearings and are protected by seals. These parts carry radial load and exclude dust, chaff and wash water, so their condition controls how long the shaft and housing last. Dealers usually hold it together with the related parts that wear in the same area, so a repair is not delayed waiting for a small component.
Key features- Housing and shaft fits matched to the original so the part is not loose or over-tight.
- Sealing lip and dust exclusion designed for chaff and wash-down conditions.
- Supplied clean and ready to install with standard tools.
- Fits Gleaner R65. See the compatibility table for the full list of machines.
- Packed with rust preventive protection and labelled with the reference number for easy receiving checks.
- Minimum order one 1 piece, payment by T/T, standard delivery 7-15 days.
| AGCO Part No. | 6131916 |
|---|---|
| Description (EN) | BUSHING |
| Part Type | Bearings & Seals |
| Unit | 1 piece |
| Net Weight | Not specified by the factory data sheet |
| Place of Origin | China |
| Minimum Order | 1 1 piece |
| Payment Terms | T/T |
| Delivery Time | 7-15 days |
| Supply Ability | 500 pieces per month |
| Packing | Carton with rust preventive wrap, palletised for export |
| Brand | Machine models |
|---|---|
| Gleaner | R65, S67 Super, S77 Super, R66, A66, R76, S68, S78, S88, A76 |
| Massey Ferguson | MF9190, MF9192, MF1839, 9183, MF2170XD, MF9195 DISC HEADER, MF9196 DISC HEADER, MF9520, MF9540 Tier 4 TI, MF9560 Tier 4 TI, MF2270XD, MF9560 T4F, MF9565 |
- Clean the shaft seat and housing bore before pressing in a new bearing or seal.
- Press on the race that is being fitted, never through the rolling elements.
- Lubricate the seal lip and the shaft before assembly so the lip does not run dry on start-up.
- Check shaft end float and alignment after fitting; a misaligned housing shortens bearing life sharply.
- Re-grease to the schedule and check for weeping within the first hours of operation.
A: 6131916 is listed for Gleaner: R65, S67 Super, S77 Super, R66, A66, R76, S68, S78; Massey Ferguson: MF9190, MF9192, MF1839, 9183, MF2170XD, MF9195 DISC HEADER, MF9196 DISC HEADER, MF9520. Confirm your model and serial range with us if the machine has been repaired before with non standard parts.
A: No. It is an aftermarket replacement manufactured to fit machines that use reference 6131916. It is supplied as a cost effective alternative for maintenance and repair work.
A: It is a bearing, bush or seal that supports a rotating shaft or keeps lubricant in and contamination out. Rotating assemblies on a square baler such as the packer, stuffer and knotter shafts run in bearings and are protected by seals. These parts carry radial load and exclude dust, chaff and wash water, so their condition controls how long the shaft and housing last.
A: Send us your machine model, serial range and a photo of the existing part. We check the reference number and the visual details against the listing before you commit to an order.
A: Minimum order is one 1 piece, payment by T/T, delivery normally 7-15 days after payment confirmation, with supply capacity of around 500 pieces per month.
A: Bearings are supplied with standard preservative grease. Add the lubricant specified in your service manual for the application before running the machine.
Send us your part number, machine model and quantity, and we will confirm price, packing and lead time. Mixed orders combining this bearing and seal part with knotter parts, needles, knives and feeder dogs from the same machine family can be consolidated into one shipment.
